Leaves Candle Holder

Instructions

1. Cut out three leaf patterns. Use marker to trace onto the foam. Use Foam Cutter to cut out leaves. (Tip: Start by cutting apart leaves and roughly cutting around marker lines. Then, carefully cut on marker lines.) Trace the candle onto the center of each leaf and cut out the opening. (Tip: Make a starter hole and then widen opening along marker line.)
2. Press finger along all edges to round.
3. In a well-ventilated, newspaper-covered area (inside cardboard box) spray all sides of leaves and inside center opening with several coats of texture spray. Let thoroughly dry overnight. Then spray each leaf with several coats of one of the colors and let dry. (Tip: Before spraying, insert a toothpick into each leaf and set the other end of the toothpick into a scrap of foam. When spraying, toothpick holds up leaf so that you can spray all sides at once, without waiting for aside to dry.)
4. Set LED votive candles inside openings. Display in table arrangement or as autumn room décor.