Jewel Tone Wreath

Instructions

1. In a well-ventilated, newspaper-covered area, spray foam Wreath with two coats of Fuchsia. Let dry.
2. Trace wreath on newspaper to make wreath pattern. To plan the color position of balls, place balls on a paper pattern as desired. (Hint: Place all the same color balls first, distributed evenly around the wreath. Then place the next color. Continue, placing one color at a time to get an even distribution of colors.)
3. One at a time, use a glue gun to attach balls from the pattern onto the same position on the wreath. (Note: Some balls are attached to the wreath front, while others are attached along “edges” of the wreath, going toward inside or outside. Also, vary the position of ornament caps.)
4. With a Wire Cutter, cut berry cluster branches from floral stems. Referring to the photo, insert alternate color clusters between ornaments around the wreath.
5. For the hanger, hold a wreath to determine the top center and placemark on the back. At the mark, use a Foam Cutter to make a 1/4″ long, shallow horizontal slit. Carefully insert the blade into the slit, angled up toward the top, and remove. Slightly separate curved ends of paper clips 1/4″. Insert shorter rounded ends into slits, creating hanger loops with the longer end of a paper clip. (Hot glue if loose.)