Your Search for "smooth finish" results:
Smooth Decorative Spheres
Completely coat the ball with Smooth Finish™. Smooth Finish™ can be applied to foam in a couple of different ways; with a spatula or a flat paintbrush. Be sure to mix the material before using it. When using a spatula, apply a small amount of the Smooth Finish™ to the foam and spread it out […]
Smooth Ornament with Glitter and Ribbon
Completely coat the ball with Smooth Finish™. Smooth Finish™ can be applied to foam in a couple of different ways; with a spatula or a flat paintbrush. Be sure to mix the material before using it. When using a spatula, apply a small amount of the Smooth Finish™ to the foam and spread it out […]
Smooth Ornament with Beaded Embellishments
Completely coat the ball with Smooth Finish™. Smooth Finish™ can be applied to foam in a couple of different ways; with a spatula or a flat paintbrush. Be sure to mix the material before using it. When using a spatula, apply a small amount of the Smooth Finish™ to the foam and spread it out […]
Smooth Half-Ball Trees
For the tallest tree; cut a 4”, 3”, 2.5”, 2”, and 1.5” ball in half. Glue the half balls together, stacked one on top of the other, from the largest to the smallest, with ½ toothpicks inserted in between each layer. Glue two 1” balls on top of the tree. Stack the balls straight up […]
Wood Grain Kitchen Sign
1. On cutting mat, horizontally place foam block. Measure and mark every 2 1/2″ for a total of seven strips (11 15/16″ long). Use a serrated knife to cut along pencil lines, scoring lightly first and then pressing deeper with each knife’s pass. 2. Use a table knife to apply Smooth Finish to one strip, […]
Chalkboard Eggs
Set a piece of plastic wrap on the table. Use Foam Tools, Knife (smooth side) to apply Smooth Finish™ onto each egg, as smoothly as possible. Set eggs on plastic wrap to dry. When totally dry, use sandpaper to sand eggs to smooth as needed. (Note: If any areas are thin or need a new […]
Christmas Countdown
Use the foam cutter to cut the foam sheet in half. You should have two 12×18″ pieces. Set one piece aside. and Cut 3″ off the 18″ side of the second piece. You should have a 3″ x18″ piece and a 9″ x18″ piece. Use the spatula to apply the Smooth Finish® to the top […]
Merry Christmas Faux Pallet Art
Lay the ruler across the 12″ end of the foam sheet. Make a mark every 4″ with the black marker to create the boards. Do this at both ends of both foam sheets. Lay the ruler even with the marks at the top and bottom of the foam sheet. Hold the ruler tightly to the […]
Crafty Candy Corns
Smooth Candy Corns Cut the front and back of each of the cones flat with the Foam Cutter. The cones should measure about 1 ¾” thick at the bottom. Use the scrap pieces of foam as sanding blocks to even the edges and give the candy corn a rounded shape. Apply an even coat of […]
Nautical Faux Pallet Art
1. Lay the ruler across the 12″ end of the foam sheet. Make a mark every 4″ with the black marker to create the boards. Do this at both ends of all three foam sheets. Lay the ruler with the marks at the top and bottom of the foam sheet. Hold the ruler tightly to […]
Faux Pallet Art
Measure and mark four 3”x18” pieces from the foam sheet with a pencil. Use the foam cutter to cut the pieces apart. Use the foam cutter to cut about 1” to 1.5” off the end of two pieces. Use the foam cutter to slightly round the corners of the pieces. This will give the wall […]
Metallic Mushrooms
Cut the 4” and 5” balls in half. Use the metal spoon to scoop out each half ball to create four hollow half balls. Scoop the ball out evenly so that you have about a 3/8” thick shell. Completely coat the half balls with Smooth Finish™. Smooth Finish™ can be applied to foam in a […]